1. Ergatta
  2. Member Resources
  3. Troubleshooting

Re-Assembling the Recoil Strap

In this article

    In the event the recoil strap come apart during adjustment, the following steps may be followed:

    1. Place the recoil strap through the buckle as shown below:

      IMG_0580_Medium.jpeg
      Bottom View

      IMG_0581_Medium.jpeg
      Top View

    2. Place the recoil strap the bungee connector, then run it back through the buckle

      IMG_0582_Medium.jpeg
      Recoil Belt & Bungee Connector

      IMG_0584_Medium.jpeg
      Recoil Belt through Bungee Connector

      IMG_0585_Medium.jpeg
      Recoil Belt back through the buckle.

    3. Run the belt through the buckle one final time, then pull until fully tightened.

      IMG_0586_Medium.jpeg

    4. Reattach the recoil strap, ensuring the strap is properly aligned in the pulleys.

      re-clip_bungee.jpg

    Please reach out to us if you have any additional questions, and include your rower’s serial number as well as your shipping address.

    Related articles